TECHNINIŲ DUOMENŲ LAPAS
30.01.2014

Akvi Top FD 30 - Acrylate topcoat

 
Akvi Top FD 30
M1
APIBŪDINIMAS One-component water-borne acrylate topcoat.
SAVYBĖS

Fast drying topcoat for interior use.

Paskirtis Suitable for panels, doors, mouldings and other wooden/fibre board surfaces.

TECHNINIAI DUOMENYS
Papildomos savybės Good blocking resistance.
Low VOC content.
The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.
Spalva AVATINT tinting system
Spalvų katalogai RAL, NCS, SSG, BS and SYMPHONY colour cards.
Blizgumas Pusiau matinis
Statybinių medžiagų emisijos klasė M1
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage

wet

dry

 

 110–120 g/m2

30µm

9–10 m2/l

 

Practical coverage depends on application method, painting conditions and shape and quality of the substrate.

Skiediklis Vanduo
Įrankiai

Application (+ 23 °C)

Airless spraying, air-assisted airless spraying and conventional spraying.

 

For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.

 

For air–assisted airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015"  and  pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 0–5% . Recommended nozzle tip is 1.6–2.2mm and  pressure 2–3 bar.

Džiūvimo laikas

+23ºC

+50ºC

Dust dry, after

25–30min

5–10min

Touch dry, after

25–30min

5–10min

Dry to sand, after

30–35 min

10–15min

 Drying and recoating times are related to film thickness, temperature, relative humidity of the air and ventilation.

Ypatinga savybė


Sausasis likutis 33±2% by volume
43±2% by weight
Tankis 1.2±0,1 kg/ litre
Gaminio kodas 454 serie

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos Substrate must be clean and dry before painting. During application and drying air temperature, substrate and paint must be over +18ºC and relative humidity of the air must be below 70%.
Paviršiaus paruošimas Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed
Gruntavimas Recommended primers:
Akvi Primer MDF, Diccoplast Primer and Dicco Surf Primer.
Komponentų maišymas Stir the paint carefully before use. Thin with water if necessary.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 14.3 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5% by volume) is 13.5 g/l.
VOC 2004/42/EC (cat A/d) 130g/l (2010)

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Saugos duomenų lapasAkvi Top FD 30
 
-


Atgal