TECHNINIŲ DUOMENŲ LAPAS
15.02.2013

Akvilac FD 25 - Acrylate lacquer

 
Akvilac FD25
APIBŪDINIMAS A water-borne, one-component acrylate lacquer.
SAVYBĖS

A very fast drying all-round lacquer for interior use. The lacquer film is transparent and it could be used on the top of dark stain colours. Excellent blocking and chemical resistance.

Paskirtis Suitable for furniture, panels, doors and other wooden surfaces. Especially suitable for fast production lines.

TECHNINIAI DUOMENYS
Spalva Temaspeed Akvi Tone -tinting.
Spalvų katalogai Shades from the Akvicolor AT colour cards and several colours by request.
Blizgumas Pusiau matinis
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

20–29 µm

70–100 g/m²

10–15 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Skiediklis Vanduo
Įrankiai

Air-assisted airless spraying and conventional spraying.

 

Application (+23 °C)

For air-assisted airless spraying, the product is thinned approximately 0-5% to the viscosity 45-65s (DIN4). Recommended nozzle tip is 0.009"–0.013" and  pressure 40-120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 0–5% to the viscosity 45-60s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and  pressure 2-3 bar.

Džiūvimo laikas

100 g/m²  wet film

+23 ºC

+ 50 ºC

Dust dry, after

2025 min

510 min

Touch dry, after

2530 min

510 min

Dry to sand, after

3035 min

510 min

 

Drying and recoating times are related to the film thickness, temperature, the relative, humidity of the air and ventilation.

 

Sausasis likutis Volume solids 29±2%
Weight solids 31±2%
Tankis 1.0 kg/litre
Gaminio kodas 447 6909 (TCW-base)

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over +18ºC and the relative humidity of the air below 70%.
Paviršiaus paruošimas Wood surfaces should be sanded with sandpaper P150–240. Primer surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Priming Recommended primers: Akvilac 25 FD.
Apply lacquer 1–2 times.
Komponentų maišymas Stir the lacquer carefully before use. Avoid flotation. Thin with water to the viscosity required.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 16 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 15g/l.
VOC 2004/42/EC (cat A/e) 130g/l (2010)

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Saugos duomenų lapasAkvilac FD 25
 
-


Atgal