Dicco Flex 30 - Acid-catalyzed topcoat

APIBŪDINIMAS A two-component modified alkyd amino resin paint.
SAVYBĖS A fast drying and elastic paint for outdoor use. Thixotropic and suitable for electrostatic spraying.
Paskirtis Recommended for wooden window frames and front doors.

Spalva White NCS S 0502-Y (255L) in 752-s.
Spalvų katalogai TEMASPEED tinting.
Blizgumas Pusiau matinis
Blizgumo standartas ISO 2813/60º
Teorinė išeiga

Recommended spreading amounts (thinned 10 %)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 130 g/m2

50 µm

9 - 10 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1027, 1033 ir 1046
Maišymo santykis Paint 100 parts by volume 752
Hardener 10 parts by volume 006 2098

Application technique             

Viscosity DIN4

Low pressure spraying

20 - 25 s

Airless spraying

25 - 30 s

Electrostatic spraying

20 - 25 s

Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 48 hours
Džiūvimo laikas

(110 - 120 g/m2)

20 ºC

50 ºC

Dry to handle, after

24 h

3 - 4 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis Abt. 56 volume %, 70 weight %
Tankis 1.2 - 1.3 kg/litre
Gaminio kodas 752 series

Dengimo sąlygos The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
Dažymas Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098. For electrostatic spraying use 8 volume % of Hardener 006 2093 and Thinner 1046. Thin the paint to the viscosity required. Let the mixture stabilize for half an hour and check the viscosity. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the paint mixture is used on the next day, add at least an equal amount of fresh paint mixture.
Įrankių valymas Thinner 1027, 1033 or 1046.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 476 g/l.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
Saugos duomenų lapasDicco Flex 30