Diccoplast 80 - Acid-catalyzed topcoat

Diccoplast 80
APIBŪDINIMAS A two-component acid-catalyzed paint.

 A fast drying, durable paint with good filling properties for indoor use.

Paskirtis Suitable for furniture, doors and other wooden and fibre board surfaces.

Spalva Special colour white 201.
Spalvų katalogai RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED PREMIUM tinting.
Blizgumas Blizgus
Emisijos klasifikacija The emission level of this product fulfils the requirements of E1 classification for surface treatment materials. The product has been tested according to the standard EN 717-1, and its formaldehyde emission rate is less than 0.124 mg/m3 air.
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage




45–55 µm

100–120 g/m2

11–12 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1027 ir 1033
Maišymo santykis Paint 100 parts by volume 634-serie
Hardener 10 parts by volume 006 2098

Air assisted airless and conventional spraying.


Air assisted airless application with the viscosity 25–50 s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure

40–140 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.


Conventional application with the viscosity 20–25 s (DIN 4) can be reached with approximately 10–20 % thinning. Nozzle tip 1.4–1.8 mm and the nozzle pressure

 2–3 bar.

Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 48 hours.
Džiūvimo laikas

100–120 g/m²

+23 ºC

+50 ºC

Dry to touch, after

20–30 min

10–20 min

Dry to stack, after

4–6 h

40–60 min

Dry to pack, after

1 d

1–2 h


Stacking temperature below +35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Sausasis likutis 58±2 % by volume
69±2 % by weight
Tankis 1.3 kg/l
Gaminio kodas 634 series

Dengimo sąlygos The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18ºC and the relative humidity of the air below 70%.
Paviršiaus paruošimas Wood surface must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.
Gruntavimas Diccoplast Primer and Diccoplast Plus Tix.
Komponentų maišymas Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098, Hardener 006 2093 or Hardener 006 2096. Thin the paint to the viscosity required with Thinner 1027 or 1033.

Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
Įrankių valymas Thinner 1027, 1025 or 1033.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 390 g/litre of paint mixture.
VOC content of the paint mixture (thinned 20 % by volume) is 450 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010)

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Saugos duomenų lapasDiccoplast 80
Skiediklio saugos duomenų lapasDiccoplast 80
Kietiklio saugos duomenų lapasDiccoplast 80