Fontecryl SC 50 - Water-borne acrylic primer

APIBŪDINIMAS A waterborne, one component fast drying alkyd modified acrylic paint which contains active anticorrosive pigments.

Suitable for product painting in metal industry and painting stations. Recommended especially as a single coat paint system for steel structures indoors and outdoors. Not suitable for immersion or constant humidity. Drying times can be shortened by using higher temperatures.

Paskirtis Typical uses are e.g. steel frameworks, machinery and equipment.

Spalvų katalogai TEMASPEED FONTE tinting.
Blizgumas Pusiau blizgus
Teorinė išeiga

Recommended film thicknesses

Theoretical coverage




40 µm

100 µm

10.0 m2/l

80 µm

200 µm

5.0 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis Vanduo
Įrankiai By conventional or airless spay.
Džiūvimo laikas

DFT 80 µm

+ 15 ºC

+ 23 ºC

+ 60 ºC

Dust dry, after

1½ h

30 min

5 min

Touch dry, after


1 ½ h

15 min

Recoatable with the product itself

No limitations

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 40 ± 2 volume % (ISO 3233)
50 ± 2 weight %
Tankis 1.2 ± 0.1 kg/l .
Gaminio kodas 624 -series

Dengimo sąlygos All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15ºC during application or drying. Relative humidity should be between
20 - 70%. The surface temperature of the steel should remain at least 3ºC above the dew point.
Paviršiaus paruošimas Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Fontecryl 10, Fontecryl AP.
Viršutinio sluoksnio danga Fontecryl SC 50.
Dažymas By conventional or airless spay. The application method the paint can be thinned
0 - 10%. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Įrankių valymas Water or Fonteclean 1921. The equipment must be cleaned immediately after use before the paint dries.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 40 g/litre of paint.
VOC content in paint (thinned 10 % by volume) is 35 g/l.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional use only.
Saugos duomenų lapasFontecryl SC 50