Fontedur HB 80 - Water-borne polyurethane topcoat

APIBŪDINIMAS A two component, waterborne polyurethane topcoat.

Suitable to be used as a topcoat for epoxy/polyurethane systems in steel surfaces exposed to weathering, abrasion and

chemical stress.

Paskirtis Steel surfaces.

Papildomos savybės A durable, easy to clean and non-chalking topcoat with excellent gloss and colour retention in climatic stress. Can be cured at higher temperatures. Recommended to be used for agricultural and earth moving machinery, steel framework and other steel structures, machinery and equipment.
Spalvų katalogai RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED FONTE tinting.
Blizgumas Blizgus
Teorinė išeiga

Recommended film thicknesses

Theoretical coverage




40 µm

90 µm

11.2 m2/l

60 µm

135 µm

7.5 m2/l

80 µm

180 µm

5.6 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis Vanduo
Maišymo santykis Base 2.5 parts by volume 156-series
Hardener 1 part by volume 008 7605
Įrankiai By air-assisted airless or conventional spray.
Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 1 h
Džiūvimo laikas

DFT 40 µm

+ 15 ºC

+ 23 ºC

+ 60 ºC

Dust dry, after

6 h

1 h

45 min

Touch dry, after

8 h

2 h

1 h

Recoatable , min. after

24 h

2 h

1 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 45 ± 2 volume %
60 ± 2 weight %
Tankis Approx. 1.3 kg / l mixture
Gaminio kodas 156-series

Dengimo sąlygos Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Paviršiaus paruošimas All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15ºC during application or drying. Relative humidity should not exceed 80%. The surface temperature of the steel should remain at least 3ºC above the dew point.
Priming Fontecoat EP Primer, Fontecoat EP 50, Fontecryl 10, Fontecryl AP, Fontecryl APS.
Viršutinio sluoksnio danga Fontedur HB 80.
Dažymas By air-assisted airless or conventional spray. Depending on the application method the paint can be thinned 0-10%. At air-assisted airless spray application the paint should be thinned 0-5% with water, nozzle pressure 160 - 200 bar, atomizing pressure 1-2 bar, nozzle tip 0.011"-0.013". Spray angle shall be chosen according to the shape of the object.
At conventional spray the paint should be thinned 3-10%, atomizing pressure 3-4 bar, nozzle 1.4-1.8 mm.
Komponentų maišymas First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Įrankių valymas Water or Thinner 1127.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 155 g/litre of paint.
VOC content in paint (mixed 10 % of water) is 145 g/litre of paint.
Only for industrial and professional use.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Saugos duomenų lapasFontedur HB 80
Kietiklio saugos duomenų lapasFontedur HB 80