TECHNINIŲ DUOMENŲ LAPAS
12.08.2016

Fontefacade SC 50 - Acrylate single-coat paint

 
Tikkurila Industry 9L
APIBŪDINIMAS A water-borne one-component, fast-drying acrylate exterior single-coat paint.
SAVYBĖS

Recommended for fast production lines and drying in elevated temperature as well as in room temperature.

The paint can be used as a primer and a topcoat.

Paskirtis Suitable for exterior mineral substrates such as fibre-cement flat sheets.

TECHNINIAI DUOMENYS
Papildomos savybės • Good anti-blocking properties.
• Good weathering resistance.
Heat of Combustion (PCS): 20,0 MJ/kg according to standard EN ISO 1716.
Reaction to fire: A2-s1, d0 according to standard EN 13501-1 was tested with the following painting systems: Fontefacade SC 10 (100 g/m2) + Fontefacade SC 50 (100 g/m2)
Bazė A ir C
Spalvų katalogai The shades of the Tikkurila Facade color card, RAL and NCS color card for exterior use.
Avatint tinting system.
Blizgumas Pusiau blizgus
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

final surface

 90–160 µm

150–300 g/m²

3–9 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis Vanduo
Įrankiai Airless spraying and air-assisted airless spraying.
Džiūvimo laikas

170 g/m²

+23ºC

+40ºC

Dry to touch or stack, after

15 min

5 min


Final mechanical properties are achieved after several days. Drying and recoating times are related to the wet film thickness, thinning, color shade, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 43 volume %
54 weight %
Tankis 1.2 kg/l
Sandėliavimas Must not freeze. The best storage temperature is between +15–+25°C.
Gaminio kodas 66V-series.

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying temperature of the air, substrate and paint must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.
Paviršiaus paruošimas Surfaces must be free of dirt, dust and grease.
Gruntavimas Fontefacade SC 50.
Skiedimas Paint is recommended to be used without thinning. If needed thin with water max. 2%. Thinning will slow down drying times.
Dengimas For airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
Komponentų maišymas Stir the paint carefully before use.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) According to VOC Directive 2004/42/EU the product subcategory A/c VOC limit (1.1.2010) is maximum 40 g/l. VOC content of "Fonte Facade SC 50" is 30±10 g/l.

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
-
Saugos duomenų lapasFONTEFACADE SC 50
 
APLINKOSAUGA IR ATLIEKŲ TVARKYMAS Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.
-


Atgal