Luminol 25 N - UV-curing water-borne paint

Luminol 25 N
APIBŪDINIMAS UV-curing, water-borne urethane polyester paint.
SAVYBĖS Wooden surfaces indoors. Good abrasion and chemical resistance.
Paskirtis Recommended for furniture, doors of kitchen fittings and other wooden surfaces indoors.

Spalva White (NCS S 0502-Y). Other colors by request.
Blizgumas Pusiau matinis
Blizgumo standartas ISO 2813/60º
Teorinė išeiga

8 - 10 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis Vanduo

Application technique

Viscosity DIN4

Low pressure spraying

40 - 60 s

Airmix or airless spraying

40 - 60 s

Džiūvimo laikas (90 - 110 g/m2)

Dry to stack immediately after UV curing.

Flash-off 1 min / 23 ºC + 5 min / 50 ºC before UV-curing.

Flash-off time depends on the temperature and the efficiency of the ventilation.

Required UV-energy: 500 mJ/cm2 + 500 mJ/cm2. For proper curing of thicker layers, use both Gallium and Mercury lamps in UV-curing.
Sausasis likutis abt. 35 % by volume, 48 % by weight.
Tankis 1.2 kg/litre
Gaminio kodas 960 7162 (White), 960 7087 (NCS S 0502-Y)

Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
Dažymas Stir the paint carefully before use. Thin with water to the viscosity required.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount to 4 g/litre of paint.

pagal reglamentą EB Nr. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Saugos duomenų lapasLuminol 25 N