Merit Topas 10 - Acid-catalysed lacquer

Merit Topas 10
APIBŪDINIMAS A two-component acid-catalyzed lacquer.

A fast-drying lacquer with good filling properties for interior use.


Paskirtis Recommended for furniture, doors and other wooden surfaces indoors.

Papildomos savybės Contains no aromatic solvents.
Spalva Clear.
Blizgumas Matinis
Blizgumo standartas ISO 2813/60º
Emisijos klasifikacija Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0,12 mg/m3 air.
Teorinė išeiga

3 - 5 m2/l (100 µm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1035 ir 1058
Maišymo santykis Lacquer 100 parts by volume 005 2794
Hardener 10 parts by volume 006 2098

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Curtain coating

30 - 45 s

Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 3 days.
Džiūvimo laikas



50 ºC

70 ºC


Dry to sand, after

20 - 25 min

15 - 20 min

2 - 3 min

Dry to pack, after

30 - 40 min

25 - 30 min

3 - 5 min


Stacking temperature below 35ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Sausasis likutis Volume solids abt. 36 %
Weight solids 44 %
Tankis 1,0 kg/l
Gaminio kodas Lacquer 005 2794, hardener 006 2098.

Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
Paviršiaus paruošimas Wood surfaces should be sanded with sandpaper P150–240. Primer surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Komponentų maišymas Stir the lacquer carefully before use. Add 10 volume % of Hardener 006 2098. Thin the lacquer to the viscosity required with Thinner 1035 or 1058. Thinning is not need in curtain coating.

Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
In case the lacquer mixture is used on the next day, add at least an equal amount of fresh lacquer mixture.

Įrankių valymas Thinner 1035 or 1058.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount to 540±20 g/l.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.
Saugos duomenų lapasMerit Topas 10
Skiediklio saugos duomenų lapasMerit Topas 10
Kietiklio saugos duomenų lapasMerit Topas 10