TECHNINIŲ DUOMENŲ LAPAS
Pinja Top - Water-borne acrylate paint
|APIBŪDINIMAS||A water-borne acrylate semi-opaque exterior paint.|
Suitable for exterior wooden panels and claddings.
|Papildomos savybės||Semi opaque paint maintains natural surface structure of wood.
Contains alkyd for improved adhesion to bare wood.
Protects the surface against moisture, sunlight and dirt.
|Spalvų katalogai||The shades of Tikkurila colour card for Wooden Facades.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Airless, air assisted airless and conventional spraying.
Application (+23 °C)
For airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.013"–0.015" and pressure 140–180 bar. Spray angle shall be chosen according to the shape of the object.
For air–assisted airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.013"–0.015" and pressure 40–140 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 1.6–2.0 mm and pressure 2–3 bar.
Wood contains resin and other colouring extractives especially in knots. Temperature and humidity fluctuations may cause paint coat discolouration in these areas.
Note! Dark shades made from VC-base will dry slower.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Sausasis likutis||35% by volume, 47% by weight (VVA base)
33% by volume, 38% by weight (VC base)
|Tankis||1.2 kg/litre (VVA base), 1.1 kg/litre (VC base)|
|Gaminio kodas||247 serie, VVA base 247 6302, VC base 247 6303|
|Dengimo sąlygos||The surface to be treated has to be clean and dry. The moisture content of wood has to be below 20%. During application and drying temperature of the air, substrate and paint temperature must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.|
|Paviršiaus paruošimas||Surfaces must be free of dirt, dust and mould.|
Pinja Pro Primer, Pinja Universal Primer and Pinja Top.
|Komponentų maišymas||Stir the paint carefully before use. Avoid flotation. Thin with water if necessary.|
|Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB)||The Volatile Organic Compounds amount is 20 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 10 % by volume) is 40 g/l.
|SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS|
pagal reglamentą EB Nr. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional and industrial use only.|
|Saugos duomenų lapas||Pinja Top|