TECHNINIŲ DUOMENŲ LAPAS
02.01.2006

Temadur Clear - Polyurethane varnish

 
Temadur_Clear
MED
APIBŪDINIMAS A two component, glossy polyurethane varnish, hardener aliphatic isocyanate.
SAVYBĖS Used as a topcoat on polyurethane paint systems. Also suitable for coating of copper, brass, aluminium and zinc surfaces
Paskirtis -

TECHNINIAI DUOMENYS
Papildomos savybės Excellent weathering and abrasion resistance. A durable, non-chalking topcoat with good gloss retention and easy to clean surface. The product has MED (Marine Equipment Directive) certificate no 0809-MED-0394 and is thus accepted for painting surfaces inside the ships. For industrial use only according to Directive 1999/13/EC.
Spalva Clear
Blizgumas Labai blizgus
Teorinė išeiga

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

95 µm

10.7 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1048 ir 1067
Maišymo santykis Base 3 parts by volume 005 5600
Hardener 1 part by volume 008 7590
Įrankiai

By conventional or airless spray or by brush.

Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 2 hours viscosity of 25 s DIN 4
4 hours viscosity of 16 s DIN 4
Džiūvimo laikas

DFT 40 µm

+ 5 ºC

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

40 min

30 min

20 min

10 min

Touch dry, after

12 h

8 h

4 h

2 h

Recoatable without abrading, after

4 h - 10 d

2 h - 6 d

½ h - 72 h

15 min - 36 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 43 ± 2 volume % (ISO 3233)
48 ± 2 weight %
Tankis 1.0 kg / l (mixed)
Gaminio kodas 005 5600
MED sertifikatas VTT-C-4028-15-09 Temadur Clear

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Paviršiaus paruošimas Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming TEMADUR 20, TEMADUR 50, TEMADUR 90, TEMADUR PRIMER, TEMATHANE 50, TEMATHANE 90 and TEMATHANE PC 80.
Perdažymas TEMADUR CLEAR.
Lakavimas By conventional or airless spray or by brush. Depending on the temperature of the components (base, hardener, thinner) the varnish should be thinned 15 - 30 % to a viscosity of 14 - 18 s DIN4. Mixing of the components and adjustment of the viscosity should be done right before use in order to reach an optimal result. In order to obtain an even, non-porous finish, use a "wet in wet" technique: first a misty coat or a thin coat, then let the solvents evaporate for 2 - 15 minutes before applying the final coat.

The product is best suited for application by conventional spray. Airless spray nozzle tip 0.009" - 0.011" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.

When coating surfaces painted with Temadur the best result is obtained when the varnish is applied on a tacky, 10 - 30 minutes dried, surface. At brush application the varnish should be thinned according to the circumstancies.

TEMADUR CLEAR can also be applied directly on clean dry metal surfaces. Then it is recommended to apply at least two coats.
Komponentų maišymas First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Įrankių valymas Ohenne 1048, 1067 tai 1061.
Paviršiaus priežiūra Thinner 1048, 1067 or 1061.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 510 g/litre of paint.
VOC content in paint (thinned 30 % by volume) is 600 g/l.

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
Saugos duomenų lapasTemadur Clear
Skiediklio saugos duomenų lapasTHINNER 1048 [GB-ENG]
Kietiklio saugos duomenų lapasTEMADUR HARDENER 008 7590 [GB-ENG]
 
-


Atgal