Temazinc EE - Zinc-dust paint

Tikkurila Industry 9L
APIBŪDINIMAS A one component zinc dust paint.
SAVYBĖS Used as a primer for steel surfaces exposed to weathering and chemical stress. Ideal as a touch-up primer on damaged areas of zinc primed steel. Can be used without a topcoat on surfaces exposed to climatic stress.
Paskirtis Steel surfaces.

Papildomos savybės Offers cathodic protection for steel.
Spalva Grey.
Blizgumas Matinis
Teorinė išeiga

Recommended film thicknesses

Theoretical coverage




30 µm

55 µm

18.7 m2/l

50 µm

90 µm

11.2 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1006
Įrankiai By dipping, spray or brush.
Džiūvimo laikas

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

15 min

Touch dry, after

3 h

1,5 h

1 h

Recoatable, after

12 h

6 h

3 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 56 ± 2 % volume
Tankis 2.7 kg / l
Gaminio kodas 008 7395

Dengimo sąlygos All surfaces must be dry. The temperature of the ambient air or surface should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Paviršiaus paruošimas Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1)
Viršutinio sluoksnio danga TEMANYL MS PRIMER, TEMAPRIME EE and FONTECRYL 10.
Dažymas By dipping, spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint should be thinned 0 - 10 % by volume. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
Įrankių valymas Thinner 1006.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 385 g/litre of paint.
VOC content of the paint (thinned 10 % by volume) is 417 g/l.
For industrial and professional use only.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Saugos duomenų lapasTemazinc EE
Skiediklio saugos duomenų lapasTHINNER 1006 [GB-ENG]