Akvi Color AT-S - Water-borne stain

Akvi Color AT-S
APIBŪDINIMAS A water-borne stain.

 Contains light resistant pigments.

Akvi Color AT-S is designed for spraying and dipping.


Paskirtis Recommended for furniture, doors and other wood and wood fibre surfaces indoors.

Spalva Several colours by request.
Spalvų katalogai Shades from the Akvicolor AT colour cards.
Blizgumas Pusiau matinis
Emisijos klasifikacija The stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
Teorinė išeiga

10 - 20 m2/l depending on the colour.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Skiediklis Vanduo

Application technique

Viscosity DIN4

Conventional spraying  

Delivery viscosity


Delivery viscosity

Džiūvimo laikas

 (80 - 100 g/m2)

20 ºC

50 ºC

70 ºC


Recoatable, after

30 min

15 min

10 min

5 min



Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Ypatinga savybė Application (+23 °C)
Conventional application. Nozzle tip 1.0 - 1.4 mm is recommended to be used with pressure 1 - 3 bar. Spray angle shall be chosen according to the shape of the object.
Sausasis likutis 2 - 20 % by volume, 3 - 25 % by weight, depending on the colour.
Tankis 0.99 - 1.1 kg/litre depending on the colour.
Sandėliavimas 6 months (23 ºC)
Gaminio kodas 378 serie.

Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.
Paviršiaus paruošimas Wood surfaces should be sanded with sandpaper P150 - 240. All sanding dust must be removed with f.ex.vacuum. Note! The roughness of the sandpaper also effects of shade.
Paviršiaus priežiūra Recommended top lacquers: Merit, Merit Topas, Luminol Clear, Akvidur ja Akvilac. Note! Different kind of topcoats might be changed the colour shades.
Komponentų maišymas Stir the stain carefully before use. The stain is ready for use. Different application methods may result in shade variations. The shade and hue of the stain should be verified before applying large surfaces. Akvi Color AT-S can be thinned with water, if needed.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 100 g/l of stain.

pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Saugos duomenų lapasAkvi Color AT-S