TECHNINIŲ DUOMENŲ LAPAS
04.05.2013

Akvi Primer Tix - Acrylate primer

 
Akvi Primer TIX
APIBŪDINIMAS Water-borne acrylate primer.
SAVYBĖS

Suitable for furniture, doors, mouldings and other wooden surfaces in interior premises.

Paskirtis -

TECHNINIAI DUOMENYS
Papildomos savybės A fast drying thixotropic paint for indoor use.
Easy to spray also in vertical position.
Spalva White
Blizgumas Matinis
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

35–50 µm

80–120 g/m²

10–11 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Skiediklis Vanduo ir Akvi Thinner skiediklis
Įrankiai

Airless spraying, air-assisted airless spraying and conventional spraying.

 

For airless spraying, the product is thinned approximately 0–10% to the viscosity 40–80s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object.

 

For air-assisted airless spraying, the product is thinned approximately 0–10% to the viscosity 40–80s (DIN4). Recommended nozzle tip is 0.011"–0.015" and  pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 0–10% to the viscosity 40–80s (DIN4). Recommended nozzle tip is 1.4-1.8 mm and  pressure 2–3 bar.

Džiūvimo laikas

100–120 g/m² wet film

+23 ºC

+ 50 ºC

IRM

Dust dry, after

10–15 min

5–10 min

 

Touch dry, after

15–20 min

5–10 min

 

Dry to sand, after

20–25 min

5–10 min

1–2 min


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 40±2% % by volume
60±2% % by weight
Tankis 1.4 kg /l
Gaminio kodas 006 5029

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over
+18ºC, and relative humidity of the air below 70%.
Paviršiaus paruošimas Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sandidng dust must be removed
Dažymas Recommended topcoats:
Akvi Top 30, Akvi Top 30 FD, Diccoplast 30 and Luminol 25 N.
Komponentų maišymas Stir the paint carefully. Thin the paint to the viscosity required.
Įrankių valymas Water or Akvi Thinner.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 65 g/litre of paint mixture.
VOC content of the paint mixture (thinned 10% by volume) is 60 g/l.
VOC 2004/42/EC (cat A/d) 130 g/l (2010)

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Saugos duomenų lapasAkvi Primer Tix
 
-


Atgal