TECHNINIŲ DUOMENŲ LAPAS
01.02.2011

Pinjalac HB - Acrylate lacquer

 
Pinjalac HB
APIBŪDINIMAS A water-borne acrylate lacquer.
SAVYBĖS Suitable for window frames, front doors and other wooden surfaces outdoors.
Paskirtis -

TECHNINIAI DUOMENYS
Papildomos savybės A flexible exterior lacquer.
The lacquer film is very clear and transparent.
Spalvų katalogai Akvi Tone tinting system. Note that whitish colours are not recommended to the wood that has tendency for resin bleeding (for instance oak). Wood resins can change the original shade.
Blizgumas Pusiau matinis
Blizgumo standartas ISO 2813/60º
Teorinė išeiga

Approx. 8-10 m²/l at a wet film thickness of 110 µm and dry film thickness of 40 µm.

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

 


Skiediklis Vanduo
Įrankiai


 


Džiūvimo laikas

Dry to sand after 2-4 hours in the room temperature 23 ºC.

Dry to sand after 1-2 hours in the temperature of the 50 ºC.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. Stacking temperature of the painted object below 30 ºC. Through dry time is about 48 hours.
Sausasis likutis 37 ± 2 % by volume, 39 ± 2 % by weight.
Tankis 1.0 kg / litre
Gaminio kodas 485 6910

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
Lakavimas Airless and air assisted airless spraying:

Stir the lacquer carefully before use. Avoid flotation. In order to maintain good quality the lacquer is recommended to spray without thinning or max. 10 % with water. Nozzle tip size 0.011 to 0.015” and fine finish nozzle is recommended.
Paviršiaus priežiūra Wood surfaces must be sanded with roughness P150 - 240. All sanding dust must be removed with f.ex. air exhauster.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) Maximum VOC content in ready to use mixture is 20 g/l.

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use.
Saugos duomenų lapasPinjalac HB
 
-


Atgal