TECHNINIŲ DUOMENŲ LAPAS
07.09.2010

Temathane PC 50 - Polyurethane paint

 
Tikkurila Industry 9L
APIBŪDINIMAS A high-solids two component, semi-gloss polyurethane paint, hardener aliphatic isocyanate.
SAVYBĖS Used as a semi-gloss topcoat for epoxy systems exposed to weathering.
Paskirtis Recommended for painting of storage tank exteriors, steel buildings and other steelwork.

TECHNINIAI DUOMENYS
Papildomos savybės Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.
Spalvų katalogai RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED Premium tinting.
Blizgumas Pusiau blizgus
Teorinė išeiga

Recommended film thicknesses

Theoretical coverage

dry

wet

 

80 µm

125 µm

8.1 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis 1048, 1067 ir 1061
Maišymo santykis Base 5 parts by volume 419-series
Hardener 1 part by volume 008 7690 or 008 7590
Įrankiai By airless or conventional spray.
Mišinio tinkamumo trukmė (esant +23 ºC temperatūrai) 1½ hours
Džiūvimo laikas

DFT 80 µm

+ 5 ºC

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

2 h

1 h 15 min

1 h

20 min

Touch dry, after

10 h

8 h

6 h

3½ h

Recoatable, after

No limitations.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 65 ± 2 % volume (ISO 3233)
76 ± 2 % weight
Tankis 1.3 ± 0.1 kg / l (mixed)
Gaminio kodas 419-series

NAUDOJIMO INSTRUKCIJA
Dengimo sąlygos All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Paviršiaus paruošimas Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat HB Primer, Temabond, Temacoat RM 40, Temacoat SPA, Temadur 20, Temadur Primer, Temaprime GF, Fontecoat EP Primer and Fontecryl 10.
Viršutinio sluoksnio danga Temathane and Temadur.
Dažymas By airless or conventional spray. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the application method and the termperature of the components (base, hardener, thinner) the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Komponentų maišymas First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Įrankių valymas Thinner 1048, 1067 or 1061.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) The Volatile Organic Compounds amount is 330 g/litre of paint.
VOC content in paint (thinned 15 % by volume) is 410 g/l.
For industrial and professional use only.

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Coatings Oyj.
Saugos duomenų lapasTemathane PC 50
 
-


Atgal