TECHNINIŲ DUOMENŲ LAPAS
12.08.2016

Fontefacade Structure - Acrylate structured primer

 
Tikkurila Industry 9L
APIBŪDINIMAS A water-borne one-component, fast-drying structured acrylate exterior primer.
SAVYBĖS

Recommended for fast production lines and drying in elevated temperature as well as in room temperature.


Paskirtis Suitable for exterior mineral substrates such as fibre-cement flat sheets.

TECHNINIAI DUOMENYS
Papildomos savybės Excellent anti-blocking properties.
Good weathering resistance.
Grain size: Max 200 µm
Bazė A
Spalvų katalogai The light shades on the Tikkurila Facade colour card.
Avatint tinting system. Only A base paint.
Blizgumas Visiškai matinis
Teorinė išeiga

Recommended spreading amounts (unthinned)

Theoretical coverage

wet

dry

final surface

150–300 g/m²

90–160 µm

3–6 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Skiediklis Vanduo
Įrankiai Air-assisted airless spraying or conventional spraying.
Džiūvimo laikas

170 g/m²

+23ºC

+40ºC

Dry to touch or stack, after

15 min

5 min


Final mechanical properties are achieved after several days. Drying and recoating times are related to the wet film thickness, thinning, color shade, temperature, the relative humidity of the air and ventilation.
Sausasis likutis 50 by volume %
68 by weight %
Tankis 1.35 kg/l
Sandėliavimas Must not freeze. The best storage temperature is between +15–+25°C.
Gaminio kodas 84V serie

NAUDOJIMO INSTRUKCIJA
Paviršiaus paruošimas The surface to be treated has to be clean and dry. During application and drying temperature of the air, substrate and paint must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.
Gruntavimas Fontefacade SC 10, Fontefacade SC 50 and Fontefacade CC 30.
Skiedimas Paint is recommended to be used without thinning. If needed thin with water max. 5%. Thinning will slow down drying times.
Dažymas For air-assisted airless spraying, recommended nozzle tip is 0.017"–0.019" and pressure 80–160 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

For conventional spraying, the product is thinned approximately 0–5% with water. Recommended nozzle tip is 1.6–1.8 mm and pressure 2–3 bar.
Įrankių valymas Water.
Lakiųjų organinių junginių kiekis (LOJ) (direktyva 2004/42/EB) According to VOC Directive 2004/42/EU the product subcategory A/c VOC limit (1.1.2010) is maximum 40 g/l. VOC content of "Fontefacade Structure" is 25±10 g/l.

SAUGOS IR SVEIKATOS APSAUGOS ŽENKLINIMAS
pagal reglamentą EB Nr. 1272/2008
-
Saugos duomenų lapasFONTEFACADE STRUCTURE
 
APLINKOSAUGA IR ATLIEKŲ TVARKYMAS Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.
-


Atgal